Gastroesophageal reflux disease and tooth erosion

The increasing prevalence of gastroesophageal reflux disease (GERD) in children and adults, and of “silent refluxers” in particular, increases the responsibility of dentists to be alert to this potentially severe condition when observing unexplained instances of tooth erosion. Although gastroesophageal reflux is a normal physiologic occurrence, excessive gastric and duodenal regurgitation combined with a decrease in normal protective mechanisms, including an adequate production of saliva, may result in many esophageal and extraesophageal adverse conditions. Sleep-related GERD is particularly insidious as the supine position enhances the proximal migration of gastric contents, and normal saliva production is much reduced. Gastric acid will displace saliva easily from tooth surfaces, and proteolytic pepsin will remove protective dental pellicle. Though increasing evidence of associations between GERD and tooth erosion has been shown in both animal and human studies, relatively few clinical studies have been carried out under controlled trial conditions. Suspicion of an endogenous source of acid being associated with observed tooth erosion requires medical referral and management of the patient as the primary method for its prevention and control.Sarbin Ranjitkar, John A. Kaidonis, and Roger J. Smale

A radiographic assessment of the prevalence of pulp stones in Australians

The document attached has been archived with permission from the Australian Dental Association. An external link to the publisher’s copy is included.Background: Pulp stones are discrete calcified bodies found in the dental pulp. The aims of this study were to calculate the prevalence of pulp stones in young Australian adults using radiographs, and to report any associations between occurrence of pulp stones and sex, tooth type, dental arch, side and dental status. Methods: From 217 undergraduate dental students, comprising 123 males and 94 females aged between 17-35 years, 3296 teeth were examined under 2x magnification on bitewing radiographs. Pulp stones were scored as present or absent, and associations with sex, tooth type, dental arch, side and dental status noted. Results: Pulp stones were found in 100 (46.1 per cent) of the subjects and 333 (10.1 per cent) of the teeth examined. Occurrences were rare in premolars (0.4 per cent) but significantly higher in molars (19.7 per cent). Pulp stones were significantly more common in first molars than in second molars, and in maxillary first molars than in mandibular first molars. Carious and/or restored maxillary right first molars and maxillary left second molars displayed higher prevalences of pulp stones than unrestored and intact molars. Conclusion: Pulp stones may provide useful forensic information when examining dental records to identify deceased persons.S Ranjitkar, JA Taylor and GC Townsen

Effects of non-carious cervical lesion size, occlusal loading and restoration on biomechanical behavior of premolar teeth

Accepted manuscript online: 15 DEC 2015Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyze the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behavior of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests.Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group).There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p<0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations.Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs. This article is protected by copyright. All rights reserved.LF Zeola, FA Pereira, AC Machado, BR Reis, J Kaidonis, Z Xie, GC Townsend, S Ranjitkar, PV Soare

An anthropological perspective: Another dimension to modern dental wear concepts

Extent: 6p.For many years, research on tooth wear by dental academics has been diametrically opposite to that of anthropological research, with each discipline having a different understanding as to the nature of the wear processes. Dental focus revolved around preventive and restorative considerations while the anthropological focus was a biological understanding related to human evolution, diet, environment, form, and function and included all the craniofacial structures. Introducing the anthropological perspective into modern dentistry gives an insight into the “bigger picture” of the nature and extent of tooth wear. By combining anthropological evidence with clinical knowledge and experience, it is most likely to provide the best-informed and biologically based approach to the management of tooth wear in modern societies.John A. Kaidonis, Sarbin Ranjitkar, Dimitra Lekkas, and Grant C. Townsen

Titania nanotube-based protein delivery system to inhibit cranial bone regeneration in Crouzon model of craniosynostosis

Background: Craniosynostosis is a developmental disorder characterized by the premature fusion of skull sutures, necessitating repetitive, high-risk neurosurgical interventions throughout infancy. This study used protein-releasing Titania nanotubular implant (TNT/Ti) loaded with glypican 3 (GPC3) in the cranial critical-sized defects (CSDs) in Crouzon murine model (Fgfr2c342y/+ knock-in mutation) to address a key challenge of delaying post-operative bone regeneration in craniosynostosis. Materials and Methods: A 3 mm wide circular CSD was created in two murine models of Crouzon syndrome: (i) surgical control (CSDs without TNT/Ti or any protein, n=6) and (ii) experimental groups with TNT/Ti loaded with GPC3, further subdivided into the presence or absence of chitosan coating (on nanotubes) (n=12 in each group). The bone volume percentage in CSDs was assessed 90 days post-implantation using micro-computed tomography (micro-CT) and histological analysis. Results: Nano-implants retrieved after 90 days post-operatively depicted well-adhered, hexagonally arranged, and densely packed nanotubes with average diameter of 120±10 nm. The nanotubular architecture was generally well-preserved. Compared with the control bone volume percentage data (without GPC3), GPC3-loaded TNT/Ti without chitosan coating displayed a significantly lower volume percent in cranial CSDs (P<0.001). Histological assessment showed relatively less bone regeneration (healing) in GPC3-loaded CSDs than control CSDs. Conclusion: The finding of inhibition of cranial bone regeneration by GPC3-loaded TNT/Ti in vivo is an important advance in the novel field of minimally-invasive craniosynostosis therapy and holds the prospect of altering the whole paradigm of treatment for affected children. Future animal studies on a larger sample are indicated to refine the dosage and duration of drug delivery across different ages and both sexes with the view to undertake human clinical trials.Manpreet Bariana, John A Kaidonis, Dusan Losic, Sarbin Ranjitkar, Peter J Anderso

The reliability and predictive ability of the Test of Infant Motor Performance (TIMP) in a community-based study in Bhaktapur, Nepal

Aim: In a Nepalese setting, to measure the reliability of the Test of Infant Motor Performance (TIMP) and its ability to predict development scores at 6 months. Methods: Nepalese infants (n = 705) were assessed by the TIMP when they were 8-12 weeks old and the Bayley Scales of Infant and Toddler Development, 3rd edition (Bayley-III) at 6 months. Inter-rater agreement was expressed by intraclass correlation coefficients (ICCs), the internal consistency by Cronbach's alphas and Pearson correlation coefficients. Predictive ability was estimated in linear regression models. Results: Inter-rater agreement was excellent (ICCs > 0.93). Alphas for the TIMP total scores were 0.76 for infants born to term and 0.72 in those born preterm. Correlation coefficients between TIMP total and Bayley-III subscale-scores ranged from 0.05 to 0.28 for term infants and from 0.15 to 0.43 for preterm infants. Using American norms, 56.3 % had TIMP scores within average and 43.7 % below average range. Bayley-III subscale scores were lower in children with TIMP scores below the average range, with the strongest estimates for Gross motor and Socio-emotional development. Interpretation: The reliability of the TIMP was acceptable, and the TIMP could be a feasible tool to monitor infant motor development in low-resource settings. Properties of the TIMP differed according to gestational age. Keywords: Infant motor development; Low-resource setting; Nepal; Psychometric properties; TIMP.The reliability and predictive ability of the Test of Infant Motor Performance (TIMP) in a community-based study in Bhaktapur, NepalpublishedVersio

Tooth wear development in the Australian Aboriginal dentition from Yuendumu: a longitudinal study

The analysis of dental wear, at both the microscopic and macroscopic scale, is one of the most widely used tools in archeology and anthropology to reconstruct the diet and lifestyle of past human populations. Biomechanical studies have indicated that tooth wear helps to dissipate the mechanical load over the crown surface, thus reducing the risk of tooth fracture. To date, there are only a few studies that have examined functional tooth wear variation in modern humans. Here we propose to study masticatory efficiency through the use of the Occlusal Fingerprint Analysis method, a well-developed digital approach that allows the reconstruction of the occlusal dynamics occurring during mastication. The aim of this study is to provide the first longitudinal quantitative data of molar and premolar macrowear patterns within a functional context. We examined the mixed and permanent dentition of one Australian Aboriginal child (from ages 8 to 17) from Yuendumu, using high-resolution surface scans of dental casts including both upper and lower arches. Our results suggest that the occlusal macrowear patterns of this individual did not significantly change through time. Occlusal contact parameters such as functional area, inclination and direction remain relatively unaltered throughout childhood and adolescence, indicating little change in the masticatory function of this individual. The functional tooth wear pattern in this individual did not change longitudinally indicating the degree of masticatory efficiency has most probably remained unaltered.Jinyoung Lee, Sarah Fung, Robin Yong, Sarbin Ranjitkar, John Kaidonis, Alistair R. Evans, Luca Fiorenz

Criterion for traffic phases in single vehicle data and empirical test of a microscopic three-phase traffic theory

A microscopic criterion for distinguishing synchronized flow and wide moving jam phases in single vehicle data measured at a single freeway location is presented. Empirical local congested traffic states in single vehicle data measured on different days are classified into synchronized flow states and states consisting of synchronized flow and wide moving jam(s). Then empirical microscopic characteristics for these different local congested traffic states are studied. Using these characteristics and empirical spatiotemporal macroscopic traffic phenomena, an empirical test of a microscopic three-phase traffic flow theory is performed. Simulations show that the microscopic criterion and macroscopic spatiotemporal objective criteria lead to the same identification of the synchronized flow and wide moving jam phases in congested traffic. It is found that microscopic three-phase traffic models can explain both microscopic and macroscopic empirical congested pattern features. It is obtained that microscopic distributions for vehicle speed difference as well as fundamental diagrams and speed correlation functions can depend on the spatial co-ordinate considerably. It turns out that microscopic optimal velocity (OV) functions and time headway distributions are not necessarily qualitatively different, even if local congested traffic states are qualitatively different. The reason for this is that important spatiotemporal features of congested traffic patterns are it lost in these as well as in many other macroscopic and microscopic traffic characteristics, which are widely used as the empirical basis for a test of traffic flow models, specifically, cellular automata traffic flow models.Comment: 27 pages, 16 figure

Calibrating Car-Following Models using Trajectory Data: Methodological Study

The car-following behavior of individual drivers in real city traffic is studied on the basis of (publicly available) trajectory datasets recorded by a vehicle equipped with an radar sensor. By means of a nonlinear optimization procedure based on a genetic algorithm, we calibrate the Intelligent Driver Model and the Velocity Difference Model by minimizing the deviations between the observed driving dynamics and the simulated trajectory when following the same leading vehicle. The reliability and robustness of the nonlinear fits are assessed by applying different optimization criteria, i.e., different measures for the deviations between two trajectories. The obtained errors are in the range between~11% and~29% which is consistent with typical error ranges obtained in previous studies. In addition, we found that the calibrated parameter values of the Velocity Difference Model strongly depend on the optimization criterion, while the Intelligent Driver Model is more robust in this respect. By applying an explicit delay to the model input, we investigated the influence of a reaction time. Remarkably, we found a negligible influence of the reaction time indicating that drivers compensate for their reaction time by anticipation. Furthermore, the parameter sets calibrated to a certain trajectory are applied to the other trajectories allowing for model validation. The results indicate that ``intra-driver variability'' rather than ``inter-driver variability'' accounts for a large part of the calibration errors. The results are used to suggest some criteria towards a benchmarking of car-following models

Climate-fungal pathogen modeling predicts loss of up to one-third of tea growing areas

This is the final version. Available from Frontiers Media via the DOI in this record. Climate change will affect numerous crops in the future; however, perennial crops, such as tea, are particularly vulnerable. Climate change will also strongly influence fungal pathogens. Here, we predict how future climatic conditions will impact tea and its associated pathogens. We collected data on the three most important fungal pathogens of tea (Colletotrichum acutatum, Co. camelliae, and Exobasidium vexans) and then modeled distributions of tea and these fungal pathogens using current and projected climates. The models show that baseline tea-growing areas will become unsuitable for Camellia sinensis var. sinensis (15 to 32% loss) and C. sinensis var. assamica (32 to 34% loss) by 2050. Although new areas will become more suitable for tea cultivation, existing and potentially new fungal pathogens will present challenges in these areas, and they are already under other land-use regimes. In addition, future climatic scenarios suitable range of fungal species and tea suitable cultivation (respectively in CSS and CSA) growing areas are Co. acutatum (44.30%; 31.05%), Co. camelliae (13.10%; 10.70%), and E. vexans (10.20%; 11.90%). Protecting global tea cultivation requires innovative approaches that consider fungal genomics as part and parcel of plant pathology.International Postdoctoral Exchange Fellowship ProgramCAS President’s International Fellowship Initiative (PIFI)China Postdoctoral Science FoundationYunnan Human Resources and Social Security Department FoundationNational Science Foundation of China (NSFC)National Science Foundation of China (NSFC)BBSRCCAS President’s International Fellowship Initiative (PIFI)National Science Foundation of China (NSFC)Thailand Research FundsChiang Mai Universit